5M Road Line Markings - Thermoplastic - Premium Quality
🔥 Buy Direct from a UK Manufacturer – No Middleman, Just Trade-Direct Pricing Get your supply straight from the source, cutting out unnecessary costs and passing the savings directly to you. Need help or looking for bulk quantities? Call us – we’re happy to assist.
Couldn't load pickup availability
Why not check out some of our socials here!
Preformed Thermoplastic Line Marking Tape — Quick, Practical, and Made to Last
Thermoplastic Line Marking is one of those bits of kit that just does the job. It’s preformed thermoplastic — probably the easiest way to lay road lines, mark out parking bays, or sort out warehouse lanes, without the faff of paint or drying times.
Our preformed thermoplastic line marking tape is a fast, professional-grade solution for marking out roads, car parks, warehouses, school zones, and more. Each roll delivers long-lasting visibility, a non-slip reflective surface, and strong adhesion — all without the mess of paint.
Ready to install straight from the box, this torch-on tape can be applied with basic equipment and is fully traffic-ready in minutes.
Road Line Marking Tape – Sizes and Colours Available
Each roll is 5 metres long, and we keep the most common widths in stock — 50mm and 100mm — in both white and yellow.
Most customers go for 100mm when doing bays or double yellows, but the narrower option comes in handy too — especially for junctions or loading areas where you need something a bit wider.
How to Apply
Roll it out to the correct position, warm it with a gas torch until molten, and let it settle. While heating, you’ll see it soften and start bonding to the surface.
Once it cools down — you’re done. It sets quickly and holds firm, even with heavy traffic rolling over it.
Surface Prep
Perfect for tarmacadam — though it’ll work on concrete or block paving too, just use a primer first. This preformed thermoplastic road line marking tape is ideal for fast car park layouts or quick road marking jobs — no machines, no mess.
If the ground’s looking tired or rough, primer’s a smart move regardless. We stock both aerosols and 5L tins depending on how big your job is.
Thermoplastic Markings – Where It’s Used
This stuff is used everywhere:
- Car parks
- School drop-off zones
- Warehouse lanes
- Cycle paths
- Footpaths
- Playgrounds
It’s textured and reflective, so it helps with grip — especially in the wet or on sharp corners.
Common Uses:
- Parking space markings
- Warehouse lane markings
- School safety zones
- Footpaths and cycle lanes
- Arrows, symbols, numbers — we’ve got those too
- Anywhere you’d normally use road or line marking paint
Layout Compatibility
Need something cut to fit specific TSRGD layouts? No problem — we can do that too.
Things like 1003A, 1009A, 1010, and the rest. If you're following Chapter 5 diagrams, we can help get the sizing right — or just ask if you’re unsure.
We can advise on car park lines based on standard UK guidelines.
How Much to Order
Most standard car bays are about 4–5 metres long, so one roll usually covers the length.
If you’re doing the width too, plan around 2.5 metres per bay.
The tape comes pre-cut — so you’re not left trimming or wasting anything.
Whether you’re marking a warehouse, car park or road junction, this torch-on thermoplastic road marking tape is made to last.
Cold Weather Tips
If you’re installing it in colder weather, give the rolls a bit of warmth first — cold thermoplastic can snap if it’s too rigid.
Specs
BS EN 1871
Pre-formed Thermoplastic Rolls meet the following international standards: BS EN 1790, BS EN 1436, BS EN 1871, AASHTO, and FHWA.
BASt certification at P7 level of 4 million wheel-overs.
They comply with the specification requirements for retroreflectivity (where applicable), skid resistance, and luminance values.
Frequently Asked Questions
Can I install this myself (DIY)?
Yes — it’s designed for easy, DIY-friendly installation. As long as you have a gas torch, you’re good to go.
Where can I buy thermoplastic road tape?
Right here — we keep stock ready to ship. Just choose your width and colour.
Will this work on concrete or block paving?
Yes — but you’ll need to use a primer first. For older or rough surfaces, primer helps ensure it bonds properly.
Is it okay to use this tape on block paving?
You can, but be aware: block paving moves slightly over time. Use primer and understand it might not last as long as on tarmac.
What’s an easy way to mark parking bays without using paint?
This tape is exactly that. No messy road marking paint, no machines — just a torch and a steady hand.
Can I install road lines without paint?
Absolutely. This preformed thermoplastic tape is a cleaner, quicker alternative that’s used across the UK.
Is this tape suitable for tarmacadam?
Yes — it’s ideal for Tarmacadam. Just make sure it’s clean, dry, and pre-heated if the weather’s cold.
Do I need a primer for thermoplastic markings?
Only if the surface is concrete, block paving, or old/worn tarmac. We stock both 400ml aerosol primers and 5L tins.
Why This Tape?
Whether you're after a fast-install road marking kit or a durable line marking solution for long-term use, this tape delivers. It sets quickly once heated, bonds strongly, and doesn’t peel up under pressure — even from HGV traffic.
Available in both 50mm and 100mm thermoplastic rolls, this is a straightforward way to install TSRGD-compliant thermoplastic road markings without fuss. If you're following Chapter 5 road layout guidelines, we can pre-cut symbols and arrows to match diagrams like 1003A, 1009A, and more.
If you're applying to concrete or block paving, don’t forget a surface primer for thermoplastic — it helps with adhesion and gives you a cleaner result.