Thermoplastic Disabled Bay Marking

Durable, Compliant Disabled Parking Bay Markings That Last for Years

Thermoplastic disabled bay markings. They're long-lasting parking bay markings that are specifically made for Blue Badge holders, and they're totally weather-resistant. Made with a special mix of synthetic resin, high-grade colours and reflective glass beads, they stick firmly to asphalt or tarmac surfaces. Unlike regular old paint that starts to fade within months, even the worst British weather can't shift these thermoplastic disabled parking bays - and that means compliance with the regulations remains in place for years to come; making it easier for wheelchair users and people with mobility difficulties to get around.

You need to make sure these parking bays are installed properly. Regulations demand that the markings and signs are clear and visible so people don't park there when they shouldn't be, and that they're accessible to everyone. The result is clear, visible zones with extra space for wheelchair users and people who need mobility aids.

Why You’ll Love It

• Superior Durability – They can last anywhere from 3 to 5 years, and under ideal conditions up to 10 years, which is a heck of a lot longer than the paint equivalent

• Quick Application – Applying them with a blowtorch is a quick and easy way to get the job done, and your car park or street will be good to go again in minutes

• Really Visible – The wheelchair symbols that do the markings are a nice bright white with blue infill, making them super visible in the daytime and at night time too

• Weather Proof – The material has got some serious climate and UV stability, so it won't fade or degrade if you get some harsh weather or lots of direct sunlight

• Cost Effective – Using high-quality materials to put in the disabled parking bays isn't just good for durability, it also keeps the markings visible and compliant over the long-term, so you don't have to keep repainting them

What Makes It Different

• Most Paint Based Disabled Parking spots have a lifespan of about 6-18 months in high traffic areas. Drivers get the hang of spotting faded lines, and this can lead to a breakdown in enforcement of disabled parking rules - and to be honest it can be a real mess for other drivers trying to figure out what's going on.

Thermoplastic disabled bay marking is built differently:

• Preformed Design – The idea of ready-to-apply wheelchair symbols and "DISABLED" letters is that it gives all locations a consistent and professional look

• Reflective Properties – When you mix in some reflective glass beads with the thermoplastic, it helps keep the markings visible at night even as the surface starts to wear down

• Instant Bond – When you apply the thermoplastic at temperatures of 180-205 degrees, it creates a really strong, thick bond directly onto the asphalt or concrete - and that's resistant to problems like oil and fuel spills

How It Works

1. Installation Process

   1. Surface Prep The area needs to be clean and totally dry, with a level surface for the best adhesion. Sometimes you'll need to apply on a primer if the surface is concrete or looking a bit worn out.

   2. Heat It Up You need to get the thermoplastic up to a temperature of around 200 degrees with a gas torch. That gets it flowing right into any little nooks or crannies on the surface.

   3. Final Installation For a long lasting, compliant marking of the sort needed for accessibility, you need a good heat bond to the surface so that it can provide lots of space for that mobility equipment - without blocking the cars next door

   The great thing is the cooler it gets, the sooner the road is ready for traffic. Most of the time, thermoplastic markings are good to go within 5 to 10 minutes

Product Details

• Material: The signs use a top quality thermoplastic that's lead-free and chromate-free. This is mixed with retroreflective glass beads to give the signs extra visibility at night time.

• Dimensions: Disability parking bays are normally 2.4 metres wide by 4.8 metres long in off-street areas, although there's an extra 1.2 metres on either side for easier access. On the other hand, on-street markings must be no less than 6.6 metres long and 2.7 metres wide and ideally 3.6 metres wide to help people get in and out safely

• Colours Available: We can do white for the wheelchair symbol, And yellow but if you want an extra bit of contrast, we can also stock a Disabled symbol with blue background

• Application Temperature: It works best when it's burning between 180 - 205 degrees Celsius when using a gas torch to apply the signs

• Lifespan: In busy areas, it lasts for three to seven years but in quieter spots it can keep going for up to 10 years

• Compliance: This meets all the regulations in the UK, so you don't have to worry about that side of things. This covers the traffic signs act, the accessibility act and all the material specs.

Disabled parking marks need the wheelchair symbol painted in white where its most visible - usually in the middle of the bay. It's also a good idea to add the word 'DISABLED' or 'DISABLED ONLY' on a sign next to it, so people know they shouldn't park there otherwise.

Who It’s For

• Local councils and highway authorities putting in place on-street disabled parking bays that can actually be enforced

• Commercial property managers needing to sort out off-street parking that comply with regulations for their car parks

• Line marking contractors looking for top-notch, long-lasting line marking materials they can rely on

• Healthcare facilities, shopping centres, and public buildings that want to make their parking as accessible as possible with clear markings near dropped kerbs and ramps - and ideally very close to the entrance or lift

• Residents & businesses who are responsible for keeping the parking facilities in their area up to scratch on the disability front

Government guidelines say that 6% of all parking spaces should be set aside for disabled users, unless the local planning rules say otherwise. And they ideally want them placed just outside the door, or near a lift - so that people with mobility issues aren't having to walk miles to get to where they need to go.

Frequently Asked Questions

How long do thermoplastic disabled bay markings typically last? They can go on for anywhere between three to five years, depending on how well they're treated, with normal traffic flow. But then you've got factors like the state of the surface they're on, how much traffic is actually passing through, and what the weather's like to boot.

Do you need any special equipment to put the markings in? Yes, to be honest, you'll need a gas torch that can give out some serious heat - we're talking 180 to 205°C, at minimum. And basically, just to be on the safe side, you should wear safety googles and gloves.

Do these markings meet UK accessibility regulations? Yes. Like, part of making a disabled bay is drawing clear boundaries around it. You can also use that blue background version to make the lines stand out a bit more if you want, and there's actually a whole set of guidelines laid out to cover how you put the markings in, and what colours you use.

What happens if the markings start to fade or get knocked around? If bits of it start to go missing, that's no problem, you can just take the bits out and replace 'em. It's a good idea to keep an eye out for any damage or fading that might be going on, so you can get the markings sorted before it becomes an issue, for people who actually need to use the bays.

Do the markings still show up okay at night? Oh, totally. They have got these glass beads in them that are super reflective, so you can still see the markings fine even when it's dark.

Ready to Upgrade Your Disabled Bay Markings?

• Ditch the paint that's going to look worn out in no time. Thermoplastic disabled bay markings give you the durability, clarity, and regulatory compliance that your disabled parking spots really need to work

  Keeping the disabled parking areas in good nick is a big deal, because faded or unclear lines can lead to all sorts of trouble - not just with the authorities, but with people who really need that access too. You see, the disabled parking bays are reserved specifically for Blue Badge holders and by law, it's not okay to park up there without a proper Blue Badge. If you get caught, you could be looking at a Penalty Charge Notice - these can add up and to make matters worse, your vehicle might even get clamped.

  When it comes to accessible spots, it's really helpful to have a little extra room for wheelchairs to navigate - so a hatched area off to the side or behind the space, in say yellow or white, makes all the difference. Our thermoplastic line marking tape create a clear barrier that stops people parking up in the disabled bays by mistake, while making sure anyone with a Blue Badge has easy access.

  Get in touch with us now for your order to get the best job done on installing those markings. We supply quality materials.