2 Products
Sanding Rolls
Shop ProSolve sanding rolls at Ready Set Supplied for cut-to-length surface preparation. Choose green 115mm × 5m decorators' rolls or red 115mm × 1m abrasive mini rolls, each available in 40, 60, 80 and 120 grit.
Explore related sandpaper sheets and delta sanding pads for other preparation formats.
Cut-to-length abrasives for decorating and preparation
Two roll lengths for different job sizes
The green five-metre roll provides a longer supply for repeated preparation, while the red one-metre mini roll offers a compact format for smaller jobs. Both are 115mm wide. Select the length and product type that suit your work rather than assuming the rolls have identical construction because they share the same width.
Four grit grades in each range
Both roll types are available in 40, 60, 80 and 120 grit. This gives you a choice of coarse through finer abrasives while retaining a convenient roll format. Cut a piece to suit your sanding block, hand sanding task or compatible machine, and keep the remaining roll available for the next stage.
Product-specific abrasive construction
The green roll uses dyed white aluminium oxide abrasive, E-weight backing and a dry lubricant treatment to resist clogging. The red mini roll uses aluminium oxide with a resin-over-resin bond and E-weight backing, designed to reduce clogging, heat and friction. Read the individual listing for the construction of your chosen roll.
Match the abrasive to the task
The green decorators' roll suits preparation on wood, plastics, plasterboard, metals, fillers, primers and paint. The red mini roll is suitable for work on wood, masonry, plastics and old paint. Match the abrasive to the surface and the job, then test a small area before treating the whole piece. Where a machine is involved, confirm that it accepts cut abrasive of the chosen width and backing format.
Choosing the right grit and quantity
Check the surface condition, the finish you want and the equipment you will use before selecting an abrasive. A lower grit number is coarser than a higher number. Avoid choosing solely by the pack colour: read the grade and the product specification. For a job with several stages, keep the grades separate so the correct abrasive is easy to identify as work progresses.
Order by the quantity stated on the individual listing. A pack contains the selected product option; it does not include a sander, sanding block or other equipment shown for illustration. Check the size and pack count together when planning supplies for several people or repeat jobs, and retain the product code so you can reorder the same option accurately.
Prepare and check your work
Follow the instructions for your machine and the material being prepared. Confirm the abrasive is properly supported and attached before use, and inspect it as work progresses. Replace a damaged or worn abrasive rather than relying on extra pressure to restore its cut. Remove sanding residue as appropriate before moving to the next preparation or finishing stage, so remaining particles do not affect the result.
Use the product photographs alongside the option selectors to check the format, grade and pack presentation before placing your order.